Table of Contents
Advertisement
CfL4FTER 3
6) Rcmovr the Iwo srrews and then the
righi fixing covc~. Pull the fixing roller
heater carc~fully out of the upper roller.
3 - 1 6
b.
Thermoswitch
Kemove the wire cover.
11
Remove the two screws.
2)
hook holding the thermoswitch, and
1
remove the
hermoswitrh unit,
(2 Hook
(1) Screws
0 Thermoswitch unil
Figure 3-41
Note on reassembly:
When installing the thermoswitch unit,
make sure that the sensing surface of the
thermoswitch contacts the surface of the
upper fiing roller uniformly. If it does not,
check whether the leaf spring is bent.
Release the
Advertisement
Table of Contents
