821 Ilcater wire cover
Figure 3-42
4) Remove the two springs and open the
lower separation quide.
Release the hook holding the upper
lixing frame with a flat-blade screwdriver
and remove lhe upp?r fixing frame.
0 Springs
0 Upper futing frame
Figure 3-43
5) Remove the screw and then the
thermistor.
Figure 3-44
Note for reassembly:
When installing the thermistor, make sure
that the sensing surface of the thermistor
contacts the surface of the upper fixing
roller uniformly. If it does not, check
whether the leaf spring is bent.
CHAPTER 3
3-17