Table of Contents
Advertisement
D. PCL CONFIG MENU
The PCL CONFIG MENU controls certain conflguration settings for your LBP-860. You cannot
override or change options in this menu through your software applicalion.
The I/O oplion allows you to set up the communication parameters for the serial interface (if
you arc using it).
CONFIG
MENU
Farto1y
option
del%ult
AUTO
ON
CON-1
AUTO
I/O
tiO0 x 600
RES
Options
Desrriplion
Determines how the printer reacts Lo data and printer errors. You
can select:
ON:
Any non-critical error message appears on the display for
aboul 10 seconds: then the PCL READY message appears
and printing resumes.
OFF:
Any atlrndancc or error message remains in the display
until you correct lhe problem, tell the printer to continue.
or both.
Selecls thr- prinlcr interface. You can select:
AUTO: Allows the printer to determine the interface port. which
can lx either parallel or serial. The printer displays the
communications options described in the next section.
PAKALLEL:Selects the parallel interface only. The printer skips to
the
KES menu option.
SEKIAL:Selects the serial inlerfare only. The printer displays the
communications options described in the next section.
Sclwls 300 or 600 dpi. When you change resolution, it lakes
eff&l for ihe next print job or when you reset the printer through
the operator panel. You can select:
300 x 300:
600 x 600:
for graphics and fonts designed for 300 dpi.
for graphics and fonts designed for 600 dpi; use
when document contains a mix of 300 and 600 dpi
bitmaps.
CHAPTER 1
l-23
Advertisement
Table of Contents
