Table of Contents
Advertisement
CIMFTER 6
2. Installing the separation guide
[Adjusting the gap between the
separation guide and the lower
separation roller)
U n d e r n o r m a l c o n d i t i o n s . r e m o v e t h e
separation guide along with the upper
cover. If you removed just the separation
guide or replaced a bent separation guide.
adjust the gap as follows.
I n s t a l l t h e s e p a r a t i o n g u i d e a t t h e
p o s i t i o n 1.5mm a w a y f r o m t h e l o w e r
separation roller. Adjust its position by
inserting the thickness gauges (lmm and
0.5mm) i n t o t h e g a p b e t w e e n t h e
separation guide and the lower separation
guide.
cCross sectlonal view of the envelope feeder>
Separation guide
Thickness gauges
Thickness gauge
(0.5mm, ayg-ooo')
Lower semration rolle
Advertisement
Table of Contents
