Selecting the image
density
Entering the number of
prints to be made
A-61371 April 2003
Using Auto Exposure
1. Press the Exposure Mode key to select the Auto Exposure mode.
2. If the Auto Exposure setting is not satisfactory, press the appropriate
Exposure Adjustment key, either Lighter or Darker, to set the
desired image density.
Using Manual Exposure
1. Press the Exposure Mode key and select the Manual Exposure
mode.
2. Press the appropriate Exposure Adjustment key, either Lighter or
Darker, to set the desired image density.
Entering a number from 1-9
• Enter the desired number of prints using the Multi Print key "1".
If the "1" key is pressed when "9" is displayed, the number on the
display is incremented by one: 10, 11, 12, etc.
Entering a number from 10- 99
1. Set the tens digit using the "10" key.
2. Set the units digit using the "1" key.
For example, to set "25" press the "10" key twice and press the "1" key
five times.
3-9