Table 4-75 Disk Capacity Prompts - Honeywell VRX180 User Manual

Programming Function Blocks and Features
Disk capacity
Choose DISK CAPACITY under SET UP NEW SCHEDULES menu to allocate trend storage. See
Table 4-75.
Prompt
DISK CAPACITY
TREND#1 LO RATE
TREND#1 HI RATE
TREND#2 LO RATE
TREND#2 HI RATE
TREND#3 LO RATE
TREND#3 HI RATE
TREND#4 LO RATE
TREND#4 HI RATE
172

Table 4-75 Disk capacity Prompts

Range/Selections
Seconds: .25, .5, 1, 2, 3, 4, 5,
6, 7, 8, 9, 10, 20, 30, 40, 50
Minutes: 1, 2, 3, 4, 5, 10, 20,
30, 40, 50
Hours: 1
Seconds: .25, .5, 1, 2, 3, 4, 5,
6, 7, 8, 9, 10, 20, 30, 40, 50
Minutes: 1, 2, 3, 4, 5, 10, 20,
30, 40, 50
Hours: 1
See TREND#1 LO RATE
See TREND#1 HI RATE
See TREND#1 LO RATE
See TREND#1 HI RATE
See TREND#1 LO RATE
See TREND#1 HI RATE
Video Recorder – User Manual
Definition
Displays total time available for non-rollover trend storage
based on the low storage rates programmed. See Table
4-76 Disk Storage Capacity of 100MB ZIP disk.
This rate can be altered here or in the trend data setup (see
Table 4-72). If the low storage rates are changed, the disk
capacity will reflect the new trend capacity. Enter data
collection rate. This is how often the data points are
sampled. The .25 ms selection is only available for 2-input
instruments with no more than 3 points total in Trends 1-3.
The .5 sec rate cannot exceed 6 points total in Trends 1-3.
This rate can be altered here or in the trend data setup (see
Table 4-72). If the hi storage rates are changed, the disk
capacity will reflect the new trend capacity. Enter data
collection rate. This is how often the data points are
sampled. The .25 ms selection is only available for 2-input
instruments with no more than 3 points total in Trends 1-3.
The .5 sec rate cannot exceed 6 points total in Trends 1-3.