Table of Contents
Advertisement
Error message
SLOT CARD FAILURE
STORAGE FAILURE
DATA STORAGE STATUS
LOST
RJ FAILURE
CLOCK FAILURE
CLOCK RESET
TIMING ERROR
TASK ERROR
RAM ERROR
COMM PORT ERROR
Table 9-2 Internal Error Messages (continued)
1. Check for noise.
2. Check AI card connection.
3. Replace AI card.
1. Check for bad floppy disk.
2. Run disk diagnostic on the disk drive.
3. Check seating of floppy cables.
4. Replace CPU.
1. Check for bad floppy disk.
2. Run disk diagnostic on the disk drive.
3. Check seating of floppy cables.
4. Replace CPU.
1. Check reference junction sensor connection.
2. Check AI card.
3. Replace CPU.
1. Reprogram clock.
2. Reset unit.
3. Change lithium battery on interconnection board.
4. Replace CPU.
1. Reprogram clock.
2. Reset unit.
3. Change lithium battery on interconnection board.
4. Replace CPU.
1. Reprogram clock.
2. Reset unit.
3. Change lithium battery on interconnection board.
4. Replace CPU.
1. Reset unit.
2. Clear configuration and reload.
3. If message recurs, replace CPU.
1. Run RAM diagnostic.
2. Replace CPU.
1. Check communications card seating.
2. Replace communications card.
3. Replace CPU.
Video Recorder – User Manual
Diagnostic and error messages
Suggested Action
253
Advertisement
Table of Contents
