Wiring The Video Recorder - Honeywell VRX180 User Manual

NOTE: When installing the video recorder, the following limits should be respected:

2.4 Wiring the video recorder

2.4.1 Recommendations
CAUTION
•
All wiring must be in accordance with local electrical codes and should be carried out by authorized and
experienced personnel.
•
The ground terminal must be connected before any other wiring (and disconnected last).
•
A switch in the main supply is mandatory near the equipment.
• If an external fuse is used to protect the electrical circuit to the video recorder, the fuse should match the
video recorder fuse rating (fuse type) as well as for the fuseholder.
•
Sensor wiring should be run as far as possible from power wiring. (motors, contactors, alarms, etc.)
•
To reduce stray pick-up, we recommend the use of a twisted pair sensor wiring.
•
EMI effects can be further reduced by the use of shielded cable sensor wiring. The shield must be
connected to the ground terminal.
Failure to comply with these instructions may result in product damage.
Mounting angle limits
Video Recorder - User Manual
+ 15 Deg
- 15 Deg
Installation
17