Table 4-60 Set Up Bar Graph 1 Prompts; Table 4-61 Set Up Panel Display Prompts; Table 4-62 Set Up Unit Data Display Prompts; Table 4-63 Set Up Profile Display Prompts - Honeywell VRX180 User Manual

Programming Function Blocks and Features
Set Up Bar Graph 1
Table 4-60 describes the prompts for setting up Bar Graph 1.
Prompt
POINT #1 –
POINT #12
Set Up Bar Graph 2 - 3 - 4
See Table 4-60 for prompts. For Point #1 - Point #12, enter a second group of up to 12 points that will
be displayed as horizontal or vertical bar graphs.
Set Up Panel Displays
Table 4-61 describes the prompts for setting up a Panel Display and Panel Meter Display.
Prompt
POINT #1-POINT #12
Set Up Unit Data Display
Table 4-62 describes the prompts for setting up a Unit Data Display.

Table 4-62 Set Up Unit Data Display Prompts

Prompt
POINT #1-
POINT #12
Set Up Profile Displays
Table 4-63 describes the prompts for setting up a Profile display. Affects the Set point Profiler Trend
displays only.
Prompt
PROFILE #1
PROFILE #2
PROFILE #3
PROFILE #4
DISPLAY TIME
156

Table 4-60 Set Up Bar Graph 1 Prompts

Range/Selections
OFF, analog parameter,
numbers

Table 4-61 Set Up Panel Display Prompts

Range/Selections
Analog or discrete
parameters
Range/Selections
Analog or discrete
parameters

Table 4-63 Set Up Profile Display Prompts

Range/Selections
Number
Video Recorder – User Manual
Select up to 12 analog points, each to be displayed as a
vertical or horizontal bar graph.
Select up to 12 analog or discrete points. On the Panel_4
Display, these points will be displayed four at a time at a
specified rotation rate and can be seen from 15 feet
(5 meters). On a panel meter display, these 12 points will be
displayed all at once.
Select up to 12 analog or discrete points. These points will
be displayed as a list.
Select a profile display to set up.
Enter the time width of the profile trend display, in the time units
of the profile. The higher this number, the more of a profile will
fit on the screen at a time. A value of zero means the entire
profile will be displayed, if the profile has no infinite segment
loops, no infinite auto cycling, and no external ramp type.
Definition
Definition
Definition
Definition