Prompt
SET UP TIMER
Prompt
PHASE
PERIOD HOURS
PERIOD MINUTES
PERIOD SECONDS
RESET
START DAY
START HOURS
START MINUTES
START SECONDS
ATTENTION
The Start Time's value cannot exceed the Period. An error message is displayed if you enter a Start Time of 8:00:00
and a Period of 4:00:00, for example.
Table 4-35 Periodic Timer Prompts
Range/Selections
See Table 4-36 for prompts
Table 4-36 Set Up Timer Prompts
Range/Selections
NONE, DAILY, WEEKLY,
MONTHLY
0-23
0-59
0-59
OFF, discrete parameter, 0, 1
MONDAY,
TUESDAY...SUNDAY
1-31
0-23
0-59
0-59
Video Recorder – User Manual
Programming Function Blocks and Features
Definition
Selects the timer format.
Definition
Select the timer format. Remaining prompts will vary per
phase selected.
Number of hours in the period
Number of minutes in the period
Number of seconds in the period
Phase NONE only. When this discrete is ON(1), timer stops
and resets to beginning of period. When discrete is OFF(0),
timer begins again.
For Phase DAILY, select the day of the week to start the
timer.
For Phase MONTHLY, select the day of the month to start
the timer. If this number exceeds the number of days in any
given month, then the discrete switches ON(1) the last day
of that month.
Hours of the Start time.
Minutes of the Start time.
Seconds of the Start time.
127