Configuration
3.
4.
5.
86
Figure 3-71
Figure 3-72
Highlight the box beside Port, and press
and USB-Serial (1~8).
Note
If you have set the Port as None, you will not be able to make
any changes to the screen.
Note
When using the USB to serial text-in device, do NOT remove the
USB cable from the port while the system is running.
Highlight Setup..., and press
recommended settings when configuring the RS232, RS485 or USB-Serial ports.
Highlight the box beside Text-In Product, and press
the list.
Text-In Device (VP Filter) Settings Screen
Text-In Device (Generic Text and EPSON-POS) Settings
Screen
. Use the ATM or POS manufacturer's
. Select from None, RS232, RS485
. Select your device from