Figure 3-79 System Event Actions Screen - Honeywell HRXD9 User Manual

Configuration
12. Highlight the second box beside Temperature Threshold, and press
13. Highlight OK, and press
14. Highlight the Actions tab and the System Event Actions screen
15. Highlight the Alarm-Out box beside the desired event (Check Recording, Check
16. Highlight the Notify box beside the desired event and press
92
either °C (Celsius) or °F (Fahrenheit), and press
Note The box beside Last Check-Time displays the Date and Time of
the last S.M.A.R.T. check.
screen without saving the changes.
displays.
Figure 3-79
The DVR can be setup to react to system events. System events can be
associated with an Alarm-Out connector, sound the DVR's internal buzzer, and/or
notify a number of different devices.
Alarm-In, Disk Almost Full, Disk Full, Disk Bad, Disk Temperature, or Disk
S.M.A.R.T.), and press
many Alarm-Outs with the Event as you wish. If the DVR detects that event, it
triggers output signals on all the associated Alarm-Out connectors. You can also
have the DVR's internal buzzer sound if an event is detected.
Note Alarm-Out action cannot be set to System and Panic Record
events.
the entire list On and Off by highlighting Notification and pressing
toggle the individual items On and Off by highlighting that item and pressing
Highlight OK and press
to accept the changes. Selecting Cancel exits the
System Event Actions Screen
. A list of Alarm Outputs appears. You can associate as
to accept your changes.
. Select
.
(Figure 3-79)
. You can toggle
. You can
.