Configuration
9.
10. You can save your Camera changes by highlighting Save and pressing
Audio Setup Screen
1.
2.
3.
4.
64
Figure 3-39
Configure the port's setting based on the PTZ camera manufacturer's instructions.
Selecting Cancel exits the screen without saving the changes.
Highlight Audio in the Devices menu and press
(Figure
3-40) appears.
Figure 3-40
The DVR can record up to four audio inputs. Highlight the box beside the input
and press
. A list of cameras appears, and you can select which camera you
want associated with that audio input.
Highlight Enable Audio-Out and press
disabling audio out.
Note
The DVR will NOT record audio when the recording speed is set
to less than 1 ips.
You can save your Audio changes by highlighting Save and pressing
Selecting Cancel exits the screen without saving the changes.
Port Setup Window
Audio Setup Screen
. The Audio setup screen
. This toggles between enabling and
.
.