Figure 3-77 Storage Screen; Figure 3-78 S.m.a.r.t. Setup Screen - Honeywell HRXD9 User Manual

Configuration
6.
7.
8.
9.
10. Highlight the box beside Check Time, and press
11. Highlight the first box beside Temperature Threshold, and press
Document 900.0856 Rev 3.00
11/07
Figure 3-77
Highlight the box beside Disk Bad Notify, and press
level of bad disk sectors at which point you want the DVR to trigger an alert.
Percentage levels range from 10% to 90%.
Highlight the box beside Disk Almost Full Notify, and press
percentage level of disk usage at which point you want the DVR to trigger an alert.
Percentage levels range from 80% to 99%.
Highlight the Setup... box beside Disk S.M.A.R.T., and press
Setup screen (Figure
Figure 3-78
Highlight Enable, and press
Note If Enable is turned Off, you will not be able to make changes to
any of the other fields.
Monthly, Weekly and Daily. If you select Monthly, you will be asked to set the
Day of the Month and Time to perform the check. If you select Weekly, you will be
asked to set the Day of the Week and Time. If you select Daily, you will be asked
to set the Time.
and Down arrow buttons to scroll through the numbers. Refer to the hard disk
drive manufacturer's documentation for the correct temperature setting. If the
temperature of the hard disk drive exceeds the defined threshold, the system
triggers an alert.
Storage Screen
3-78) appears.
S.M.A.R.T. Setup Screen
to toggle S.M.A.R.T. Setup On and Off.
. Select the percentage
. Select the
. The S.M.A.R.T.
. You can select from
. Use the Up
91