Playing Sounds; Switching Registrations; Switching Banks; Registration - Roland Jupiter-50 Owner's Manual

Switching Registrations

A Registration is used to store the sounds selected for each Part, as
well as various performance-related settings (system parameters
are excepted).
By switching Registrations, you can instantly change the song's
sounds while you perform, or change numerous settings with a
single operation.
Here's how to switch Registrations and verify that the settings have
been changed.
1.
Press a Registration button ([1]–[4]) to select a

Registration .

The Registration will change.
MEMO
In the Top screen, you can also switch Registrations by moving
the cursor to the Registration number and using the value dial
or the [DEC] [INC] buttons.
38

Switching Banks

Each bank contains 4 Registrations. There are 4 banks, 1–4, meaning
that 4 Registrations x 4 banks = 16 Registrations are available.
Set 1
Bank Registration
1
Bank Registration
2
You can select other Registrations by switching banks.
1.
Press the [BANK] button, and then press a registration
button ([1]–[4]) to select the desired bank .
The [BANK] button and the registration button corresponding to
the currently selected bank will light; the other buttons will blink.
When you switch banks, the registration buttons ([1]–[4]) will blink.
MEMO
If you decide to cancel without switching banks, press the [EXIT]
button or the lit bank button.
2.
Press a Registration button ([1]–[4]) to select a
Registration .
The bank and Registration will be changed.
Bank Registration
3
Bank Registration
4