Roland Jupiter-50 Owner's Manual page 16

04 Registrations are Convenient for Live Performance
Selecting a Sound for the Percussion/Lower Part
1.
In the Top screen (p . 35), press the [LOWER TONE] button so it's lit .
The Percussion/Lower Part will turn on.
The cursor will move to the sound number for the Percussion/Lower Part.
2.
Press the [ENTER] button .
A sound list will appear.
3.
Press the [F1] (SN .AC) or [F2] (SN .SYN) button, to SuperNATURAL Acoustic or Synth .
4.
Use the [ ] [ ] (cursor) buttons to select a category, and use the [
5.
Press the [ENTER] button .
The tone for the Percussion/Lower Part will be selected.
Selecting a Sound for the Solo Part
1.
In the Top screen (p . 35), press the SOLO button .
The tone for the Solo Part will be selected.
If the Solo Part was off when you selected a tone, the Solo Part will automatically be switched on.
2.
Press the same solo button once again .
The solo tone list will appear.
3.
Turn the value dial to select a tone, and press the [ENTER] button .
This allows you to select other sounds of the selected category.
Saving a Registration
1.
In the Top screen (p . 35) or the REGISTRATION screen (p . 36), press the [WRITE] button .
Registration number
2.
Move the cursor to the position shown in the illustration to select the save destination, and press the [F6] (WRITE) button .
3.
Press the [F5] (OK) button .
The screen will indicate "Completed!"
The Registration has been saved.
16
] [ ] (cursor) buttons to select a tone .
If the Live Set has also been edited, it can
be saved at the same time (p. 55).