Roland Jupiter-50 Owner's Manual page 12

02 About the JUPITER-50's Sounds
Playing a Synth Sound
Selecting a Synth Sound Live Set
1.
Press the [MANUAL] button .
2.
Access the Live Set list for "SYNTH BRASS . "
3.
Turn the value dial to select "0004 Jupiter Brass 4," and press the [ENTER] button .
Using a Filter While You Play
1.
While playing the keyboard, turn the [CUTOFF/C1] knob .
The low-pass filter will smoothly modify the sound.
2.
While playing the keyboard, turn the [RESONANCE/C2]
knob .
The resonance will change, modifying the distinctive
character of the sound.
Playing an Organ Sound
Selecting an Organ Sound Live Set
1.
Press the [MANUAL] button .
2.
Access the Live Set list for "COMBO ORGAN . "
3.
Turn the value dial to select "1628 ToneWheel Org1," and press the [ENTER] button .
Switching the Rotary Sound
1.
While playing the keyboard, press the ROTARY
SOUND [SLOW/FAST] button .
Each time you press the button, the rotational speed of the
rotary speaker will speed up or slow down.
12
Playing Arpeggios
1.
Press the ARPEGGIO [UPPER] button .
An arpeggio will begin sounding when you play a chord on
the keyboard.
Using the Harmonic Bars to Change the Sound
page 53
1.
While holding down the [SHIFT] button, press the
UPPER [PIANO] button .
The TONE MODIFY screen (p. 60) will appear.
2.
Use the cursor buttons and the value dial to edit
the values .
page 47