Other Convenient Functions; Using The Usb Memory Song Player/Recorder; Basic Operations In The Song Screen; Playback - Roland Jupiter-50 Owner's Manual

Using the USB Memory Song Player/Recorder

The USB Memory Song Player/Recorder lets you
play back audio files (WAV, MP3, AIFF) that you've
copied from your computer to a USB flash drive,
or to record your keyboard performance to a USB
flash drive.
NOTE
• Never insert or remove a USB flash drive while this unit's power
is on. Doing so may corrupt the unit's data or the data on the
USB flash drive.
• Carefully insert the USB flash drive all the way in-until it is firmly
in place.
• Use USB flash drive available from Roland. Proper operation
cannot be guaranteed if other USB device is used.
• Don't connect anything other than a USB flash drive to the USB
MEMORY connector.
MEMO
If the USB flash drive contains a large number of song files, it
may take some time for them to be read.

Basic Operations in the SONG Screen

When you press the [SONG] button, the SONG LIST screen or the
SONG SETUP screen will appear.
Use the [F1] (LIST) button and [F2] (SETUP) button to switch
between screens.
In the SONG LIST screen you can select an audio file to playback.
In the SONG SETUP screen you can make settings for playback.
Audio files are listed
here.
Turn chain play on/
off (p. 66).
Adjust the volume Set the playback
of the song player. speed (p. 65).
Assign the cur- Assign the cur-
rently playing (or rently playing (or
stopped) location
stopped) location
as the start of loop as the end of loop

playback.

playback.
MEMO
Copy your audio files (WAV, MP3, AIFF) to the root folder (the top
level) of your USB flash drive, or create a folder on your USB flash
drive and copy the files into it. For more about folders in USB
flash drive, refer to "USB Flash Drive" (p. 25).
64
Indicates the current time
of the audio file.
Turn loop play on/
off (p. 65).
Set the playback
pitch (p. 65).
Playback
Here's how to play back audio files saved on the USB flash drive.
1.
Press the [SONG] button .
The SONG LIST screen will appear. A list of the audio files on the
USB flash drive will appear.
If the SONG SETUP screen is displayed, press the [F1] (LIST) button
to access the SONG LIST screen.
MEMO
If the file name or folder name contains double-byte characters
(e.g., Japanese), they will not be shown correctly in the display.
2.
Use the value dial or the [DEC] [INC] buttons to select an
audio file .
MEMO
• To view files that are inside a folder, select that folder and press
the [ ] (cursor) or [ENTER] button.
• The folder you're currently viewing is shown at the top of the
list. To return to the next higher level folder, press the [
(cursor) button.
Currently shown folder
Folder
3.
Press the [ ] (PLAY) button .
The selected audio file will play.
• Press the [ ] (STOP) button to stop playback.
When you press the [
will resume from where it was stopped.
• Press the [ ] button to return to the beginning of the audio
file.
• Rewinds the audio file while you hold down the [
• Fast-forwards the audio file while you hold down the [
button.
] (PLAY) button once again, playback
] button.
]
]