Roland Jupiter-50 Owner's Manual page 90

Parameter List
0048:Harp, 0093:APS Harp
By turning Glissando mode (CC19) on, you can cause only the notes included in a
specific scale to be sounded.
This lets you easily produce an idiomatic harp glissando simply by playing a glissando
on the white keys.
It is effective to play this while holding down the HOLD pedal.
By using Mute (CC18) you can simulate the technique of using your hand to stop the
vibration of the strings.
Parameter Value
Glissando Mode
OFF, ON
(CC19)
7th, Major, Minor,
Hrm-Mi
(Harmonic
Play Scale Minor), Dim
(Diminish),
Whole (Whole
Tone)
C, Db, D, Eb, E, F,
Scale Key
Gb, G, Ab, A, Bb, B
Variation Refer to p. 98
0049:Timpani, 0094:APS Timpani
You can play a roll by operating the Modulation controller (CC01) while playing a
note.
You can use Mute (CC18) to simulate the muting technique of using your hand to
press down on the timpani.
It is effective to assign this to the D-BEAM controller.
Parameter Value
Roll Speed (CC17) -64– +63
Variation
Refer to p. 98
0050:Strings, 0095:APS Strings
Parameter Value
Variation Refer to p. 98
0051:Trumpet, 0052:Flugel Horn, 0056:Mute
Trumpet, 0057:French Horn, 0096:APS
Trumpet, 0098:APS Mute Trumpet, 0099:APS
French Horn
By setting Bend Range to Tone, you can use the pitch bend lever to create discontinu-
ous pitch changes or falls that are typical of a brass instrument.
• Moving the pitch bend lever in the upward direction will create a discontinuous
pitch change typical of brass instruments.
• Moving the pitch bend lever in the downward direction will produce a fall effect.
If Bend Range is set to anything other than Tone, this effect will be produced if Bend
Mode (CC19) is turned on. Use this when you want to switch between discontinuous
pitch changes or falls, and conventional pitch change.
Parameter Value
Noise Level (CC16) -64– +63
Growl Sens (CC18) 0–127
Variation
Refer to p. 98
90
Explanation
If this is on, you can produce the effect
of sweeping across the harp strings by
playing a glissando on the keyboard.
Specifies the scale used when
Glissando Mode is on.
Specifies the key of the scale produced
when you play a glissando with
Glissando Mode turned on.
Performance variation sounds
Explanation
Adjusts the speed of the roll effect.
Performance variation sounds
Explanation
Performance variation sounds
Explanation
Adjusts the amount of breath noise for
the brass instrument.
Adjusts the distinctive nuance (growl)
that occurs when a brass instrument
is blown.
Performance variation sounds
0053:Trombone–0055:Bass Trombone,
0097:APS Trombone
By playing legato with the Portamento SW turned on, you can create the effect of
glissando performance on a trombone.
By setting Bend Range to Tone, you can use the pitch bend lever to create discontinu-
ous pitch changes or falls that are typical of a brass instrument.
• Moving the pitch bend lever in the upward direction will create a discontinuous
pitch change typical of brass instruments.
• Moving the pitch bend lever in the downward direction will produce a fall effect.
If Bend Range is set to anything other than Tone, this effect will be produced if Bend
Mode (CC19) is turned on. Use this when you want to switch between discontinuous
pitch changes or falls, and conventional pitch change.
Parameter Value
Noise Level (CC16) -64– +63
Growl Sens (CC18) 0–127
Variation
Refer to p. 98
0058:Soprano Sax–0061:Baritone Sax,
0100:APS Soprano Sax–0103:APS Baritone Sax
If Bend Range is set to Tone, you can use the pitch bend lever to create glissando or
fall effects.
• Moving the pitch bend lever in the upward direction will produce a glissando
effect.
• Moving the pitch bend lever in the downward direction will produce a fall effect.
If Bend Range is set to anything other than Tone, this effect will be produced if Bend
Mode (CC19) is turned on. Use this when you want to switch between glissando/fall
effects and conventional pitch change.
Parameter Value
Noise Level (CC16) -64– +63
Growl Sens (CC18) 0–127
Variation Refer to p. 98
0062:Oboe–0069:Flute 2, 0104:APS Oboe–
0109:APS Flute
If Bend Range is set to Tone, you can use the pitch bend lever to create glissando or
fall effects.
• Moving the pitch bend lever in the upward direction will produce a glissando
effect.
• Moving the pitch bend lever in the downward direction will produce a fall effect.
If Bend Range is set to anything other than Tone, this effect will be produced if Bend
Mode (CC19) is turned on. Use this when you want to switch between glissando/fall
effects and conventional pitch change.
Parameter Value
Noise Level (CC16)
-64– +63
Growl Sens (CC18) 0–127
Variation Refer to p. 98
Explanation
Adjusts the amount of breath noise for
the brass instrument.
Adjusts the distinctive nuance (growl)
that occurs when a brass instrument
is blown.
Performance variation sounds
Explanation
Adjusts the amount of the brass
instrument's breath noise or key noise.
Adjusts the distinctive nuance (growl)
that occurs when a brass instrument
is blown.
Performance variation sounds
Explanation
Adjusts the amount of breath noise for
the brass instrument.
Adjusts the distinctive nuance (growl)
that occurs when a brass instrument
is blown.
Performance variation sounds