Video Recording - TRENDnet TV-IP310PI User Manual

TV-IP310PI User's Guide

Video Recording

Pre-record: Recording time before trigger event.
Post-record: Recording time after trigger event.
Overwrite: Select Yes to allow older recordings to be
overwritten.
Enable Record Check this box and then click Save to enable video
Schedule: recording�
Click Save to save the changes�
© Copyright 2014 TRENDnet. All rights reserved.
Edit: Click Edit to edit the recording schedule.
1� Select day of the week you wan to edit the
schedule.
2� Select All Day or Customized schedule of the
day�
3� Set the time period and the event you want to
trigger the video recording continuous (always
recording) or motion detection�
4� Click Copy to Week if you want the same daily
schedule everyday. Or, you can select other
day of the week and click Copy to copy the
schedule of the day to other days.
5� Click another day of the week by clicking on its
tab to set the next schedule. Click OK when you
have finished your settings.
Video Settings
41