TRENDnet TV-IP310PI User Manual page 7

TV-IP310PI User's Guide
Warnings: Serious injury or death may be caused if any of these
warnings are neglected� Follow these safety guards to
prevent serious injury or death�
Warnings:
• If using the power adapter, please choose the power adapter that
meets the safety extra low voltage (SELV) standard or IEC60950-1
and Limited Power Source standard�
• If the product does not work properly, please contact your dealer
or the nearest service center. Never attempt to disassemble the
camera yourself. Disassembling the product will void the warranty
and may cause harm or injury�
• To reduce the risk of fire or electrical shock, do not expose this
product to rain or water�
• The installation should be done by a qualified service person and
should conform to all construction and electric regulations and
other local codes.
© Copyright 2014 TRENDnet. All rights reserved.
Cautions: Injury or equipment damage may be caused if any of
these cautions are neglected. Follow these precautions
to prevent potential injury or material damage.
Cautions:
• Make sure the power supply voltage is correct before using the
camera�
• Do not drop the camera or subject to physical shock.
• Do not touch sensor modules with fingers. If cleaning is necessary,
use a clean cloth with a bit of ethanol and wipe it gently. If the
camera will not be used for an extended period of time, put on the
lens cap to protect the sensor from dirt.
• Do not aim the camera lens at the strong light such as the Sun or an
incandescent lamp. Strong light can damage the camera sensor.
• The sensor may be burned out by a laser beam, so when any laser
equipment is being used, make sure that the surface of the sensor
will not be exposed to the laser beam.
• Do not place the camera in extremely hot, cold temperatures (the
operating temperature should be between -10°C to 60°C), dusty or
damp environment, and do not expose it to high electromagnetic
radiation.
• To avoid heat accumulation, good ventilation is required for a
proper operating environment.
• Keep out of water and any liquid.
• While shipping, the camera should be packed in its original packing.
Product Overview
4