TRENDnet TV-IP310PI User Manual page 36

TV-IP310PI User's Guide
SNMP V1/V2
Enable SNMPv1: Check this box to enable SNMP v1 management.
Enable SNMPv2c: Check this box to enable SNMP v2c management.
Read SNMP Specify the password for access the SNMP community
Community: for read only access
Write SNMP Specify the password for access to the SNMP
Community: community with read/write access
Trap Address: Specify the IP address for the SNMP trap community
Trap Port: Specify the port number for the SNMP trap community
Trap Community: Specify the name of SNMP trap community
SNMP V3
Enable SNMPv3: Check this box to enable SNMP v3 management.
Read User Name: SNMP v3 member user name
Security Level: Choose one of the security levels.
Authentication Choose the authentication method to verify the source
Algorithm: of information: MD5 or SHA.
Authentication Specify the authentication password between 8 to 32
Password: letters.
Private-key Choose the privacy key to encrypt SNMP messages:
Algorithm: DES or AES�
Private-key Specify the privacy key between 8 to 32 letters.
Password:
© Copyright 2014 TRENDnet. All rights reserved.
Write User Name: SNMP v3 manager user name
Security Level: Choose one of the security levels.
Authentication Choose the authentication method to verify the source
Algorithm: of information: MD5 or SHA.
Authentication Specify the authentication password between 8 to 32
Password: letters.
Private-key Choose the privacy key to encrypt SNMP messages:
Algorithm: DES or AES�
Private-key Specify the privacy key between 8 to 32 letters.
Password:
SNMP Other Settings
SNMP Port: SNMP service port number�
Click Save to save the changes�
Network Settings
33