Pppoe; Snmp - TRENDnet TV-IP310PI User Manual

TV-IP310PI User's Guide

PPPoE

Setup PPPoE (ADSL) connection to connect your camera with your ISP,
Internet Service Provider�
PPPoE (ADSL)
Enable PPPoE: Check this box to enable PPPoE connection.
Dynamic IP: The IP address provided by ISP
User Name: Enter the account name�
Password: Enter the password�
Confirm: Enter the password again�
Click Save to save the changes�
© Copyright 2014 TRENDnet. All rights reserved.

SNMP

SNMP Settings allows you to assign the contact details, location,
community name and trap settings for SNMP. This is a networking
management protocol used to monitor network-attached devices.
SNMP allows messages (called protocol data units) to be sent to
various parts of a network� Upon receiving these messages, SNMP
compatible devices (called agents) return data stored in their
Management Information Bases.
Network Settings
32