Table of Contents
Advertisement
TRENDnet User's Guide
Video Recording
Overwrite: Select the check box to allow older recordings to
be automatically overwritten.
Pre‐record: Recording time before trigger event.
Post‐record: Recording time after trigger event.
Stream Type: Specify to record from the main stream or sub
stream.
Enable Record
Check this box and then click Save to enable video
Schedule:
recording.
Click Save to save the changes
© Copyright 2018 TRENDnet. All Rights Reserved.
Edit: Click Edit to edit the recording schedule. The Edit
Schedule window will pop up.
1. Select day of the week you want to edit.
2. Select All Day or Customized schedule of
the day.
3. Set the time period and the event you
want to trigger the video recording
continuous (always recording) or motion
detection.
4. Click Select All or the weekday you want
to have the same schedule on different
day.
5. Click another day of the week by clicking
on its tab to set the next schedule. Click
OK when you have finished your settings.
TV‐IP323PI
37
Advertisement
Table of Contents
