Installation Camera - Lorex SG6333 Instruction Manual

CAMERA INSTALLATION
OPTION #1 – Permanent Wall Mount
Camera mounted
1. Attach the stand base to the wall or ceiling where you want to install the
camera. Locate a wall stud or ceiling, and secure the bracket using the
three supplied screws.
2. Secure the camera to the bracket by sliding the camera socket over the stand,
and fasten it in place with the supplied screw.
3. Connect the supplied 9V DC adapter to the DC IN jack at the rear
of the camera, and plug it into an electrical outlet. Make sure the adapter
connected to the camera is labeled camera. You can turn the camera ON/OFF by
pressing and holding the Channel button for 3 seconds (camera ON by default).
Wall
OPTION #2 – Temporary Mounting
1. Connect the clip-on stand
onto any object.
5
To 9V Power
Adapter