Table of Contents
Advertisement
MONITOR INSTALLATION
1.
Connect the supplied 13.8V AC adapter to the DC INPUT JACK at the rear of
the receiver monitor and plug it into an electrical outlet. Make sure the adapter
connected to the monitor is labeled monitor.
BATTERY CASE & COMPARTMENT
Remove the battery case by unscrewing the bolt at the bottom of the
monitor and sliding the battery case out. This system requires 10 'C' sized
batteries (not included)
Your wireless monitor has both AC or battery option. When using the
AC option with rechargeable batteries, your monitor will automatically
switch to back up battery feature during a power outage providing you with
uninterrupted power to the monitor. The battery option also provides you
the flexibility to move the monitor from room to room. Battery life is
approximately 2 –3 hours
Warning : To prevent damage to the unit, ensure that the batteries are
aligned properly and battery types are not mixed.
DC INPUT Jack
6
13.8V 1.0 A
AC Adapter
Plug
Advertisement
Table of Contents
