Standard Wired Camera & Camera Installation - Lorex SY14S1044C-A Instruction Manual

B&w switcher observation system
Table of Contents

Advertisement

STANDARD WIRED CAMERA
1.
Camera Lens – Delivers high quality image by using a 1/4" CMOS Image Sensor
2.
LED's - 6 IR LED's for night vision
3.
Speaker – Delivers sound from the monitor to the camera
4.
Camera Input – Connect cable to monitor
5.
Bracket – Metal bracket connects to camera for mounting to walls, ceilings or table
6.
Microphone – Picks up sound around the camera
INSTALLATION
CAMERA INSTALLATION
A. Camera Unit
Permanent installation using metal camera bracket
IMPORTANT NOTE:
Keep camera installed away from direct sunlight. Also avoid places where humidity
is high or unable to protect rain. The mounting bracket must be attached to a
structural device such as wall stud or ceiling after using suitable fastener.
2
1
6
3
4
5
-11-

Advertisement

Table of Contents
loading

Table of Contents