Related Manuals for Lorex SG 6040
Summary of Contents for Lorex SG 6040
-
Page 1: Operating Instructions
2.4 GHz WIRELESS VIDEO SECURITY SYSTEM Before operating the unit, please read this manual thoroughly ● OPERATING INSTRUCTIONS Model SG 6040 2507W41AV001A Rev.1A DATE10-MAR-2000... - Page 2 7.SPECIFICATIONS WIRELESS CAMERA FCC CLASS B NOTICE 1/3" B/W CCD imager Image sensor F2.0/f 3.7mm, 92°wide-angle lens Lens Note: 537(H) x 505(V), 270,000 pixels Total Pixels This equipment has been tested and found to comply with the limits For a Class B digital device, pursuant to Part 15 of the FCC Rules.
- Page 3 5.TRO UBLE SH O OTING If the system does not function properly, check the following points before contact the service center. CAUTION Causes and remedies Problems Camera Monitor RISK OF ELECTRIC SHOCK. DO NOT OPEN. No power - AC adapter not plugged in - AC adapter not plugged (no picture/sound) CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE...
- Page 4 SAFETY INSTRU CTIONS 4.MULTIPLE CHAN NEL O PE RATION ONE CAMERA BY MULTIPLE RECEIVER OPERATION IMPO RTANT SAFE G U AR DS You can receive A/V signal from the Wireless Camera on several Receiver monitors A l l the sa fe ty and opera t i ng ins t ruc t ions shou ld be read be fore the in remote location at the same time using one Wireless Camera with multiple app l iance is opera ted and re ta ined fo r fu tu re re f erence.
- Page 5 4.MULTIPLE CHAN NEL O PE RATION ONE RECEIVER MONITOR BY TWO CAMERAS OPERATION 8. DAMAGE REQUIRING SERVICE - Unplug this product from the wall outlet (Cont'd) and refer servicing or repairs to qualified service personnel under the following conditions 4.Turn on the Receiver Monitor and select the channel 1-2 one by one manually Channel a.
- Page 6 4.MULTIPLE CHAN NEL O PE RATION ONE RECEIVER MONITOR BY TWO CAMERAS OPERATION CHAPTER TABLE OF CONTENTS PAGE This wireless Camera & Monitor System consists of a Wireless Camera and a 5" B/W Monitor. You can connect up to two Cameras to the 1.
- Page 7 1.CONTR OLS AND FUNCTIONS 3.SYSTE M OPERATION WIRELESS CCD CAMERA OPERATION WITH MONITOR & VCR Receiver Monitor RCA Cable (1) FRONT VIEW REAR VIEW Channel Selector Switch VCR Rear DC Input Bright Control Jack V-Hold Control Contrast Control 12-14V 1.2A Video Output Jack AC Adapter or plug from...
- Page 8 3.SYSTE M OPERATION 1.CONTR OLS AND FUNCTIONS OPERATION WITH MONITOR WIRELESS MONITOR Receiver Monitor Channel Selector FRONT VIEW REAR VIEW Switch Camera 12V 500mA AC Adapter Power Switch Channel Selector Switch DC Input Jack V-Hold Control Bright Control Contrast Control 12-14V 1.2A Video Output Jack AC Adapter...
- Page 9 2. INSTALLATION 1.CONTR OLS AND FUNCTIONS WIRELESS RECEIVER MONITOR (without Battery Case) (Optional) ADJUSTING THE A/V ANTENNA FRONT VIEW REAR VIEW NOTE : The front (patterned side) of the A/V antennas on both camera and receiver monitor must face each other for optimum performance as both are directional high gain antennas.
- Page 10 2. INSTALLATION 2. INSTALLATION WIRELESS MONITOR WIRELESS CAMERA 12-14V 1.2A AC Adapter DC 12V 500 mA AC Adapter DC INPUT Jack Plug 1.Connect the supplied 1.2A AC adapter to the DC INPUT JACK at the rear of the receiver monitor and plug it into the 230V(or 120V) AC outlet. Or 1a.