Wi-Fi Protected Setup (Wps) - Hawking HWABN25 User Manual

3-3-5 Wi-Fi Protected Setup (WPS)

Wi-Fi Protected Setup (WPS) is the simplest way to build connection between wireless
network clients and this wireless access point. You don't have to select an encryption
mode and input a long encryption passphrase every time when you need to set up a
wireless client, you only have to press a button on the wireless client and this wireless
access point, and the WPS will automatically configure for you.
This wireless access point supports two types of WPS: Push-Button Configuration (PBC),
and PIN code. If you want to use PBC, you have to push a specific button on the wireless
client to start WPS mode, and switch this wireless access point to WPS mode too. You
can push Reset/WPS button of this wireless access point, or click 'Start PBC' button in
the web configuration interface to do this; if you want to use PIN code, you have to know
the PIN code of wireless client and switch it to WPS mode, then provide the PIN code of
the wireless client you wish to connect to this wireless access point. The detailed
instructions are listed follow:
Please click 'General Setup' at the top of web management interface and click 'Wireless
Configuration' on the left hand column. Select 'WPS'
80