Setup Procedure For 'Ap Bridge-Point To Point - Hawking HWABN25 User Manual

2-4-3 Setup procedure for 'AP Bridge-Point to Point':

6
Wireless (1):
Band (2):
1
3
Shows you if the wireless is enabled/disabled
Please select the wireless band you wish to use. By selecting
different band setting, you'll be able to allow or deny the
wireless client of a certain band.
If you select 2.4GHz (B), 2.4GHz (N), or 2.4GHz (G), only
wireless clients using the wireless band you select (802.11b,
802.11 Draft-N, or 802.11g) will be able to connect to this
access point.
If you select 2.4GHz (B+G), then only wireless clients using
802.11b and 802.11g band will be able to connect to this access
point.
If you want to allow 802.11b, 802.11g, and 802.11 Draft-N
40
2
4
5
1
7