Hawking HWABN25 User Manual page 79

Enable Wireless
Access Control (1):
MAC Address (2):
Comment (3):
Add (4):
Clear (5):
Delete Selected (6):
Delete All (7):
After you finish with all settings, please click 'Apply' (8) button and the following
message will be displayed on your web browser:
To enforce MAC address filtering, you have to check
'Enable Wireless Access Control'. When this item is unchecked,
wireless access point will not enforce MAC address filtering of
wireless clients.
Input the MAC address of your wireless devices here, dash ( - )
or colon ( : ) are not required. (i.e. If the MAC address label of
your wireless device indicates 'aa-bb-cc-dd-ee-ff' or
'aa:bb:cc:dd:ee:ff ', just input 'aabbccddeeff'.
You can input any text here as the comment of this
MAC address, like 'ROOM 2A Computer' or
anything. You can input up to 16 alphanumerical
characters here. This is optional and you can leave
it blank, however, it's recommended to use this field
to write a comment for every MAC addresses as a
memory aid.
Click 'Apply' button to add the MAC address and associated
comment to the MAC address filtering table.
Click 'Clear' to remove the value you inputted in MAC address
and comment field.
If you want to delete a specific MAC address entry, check the
'select' box of the MAC address you want to delete, then click
'Delete Selected' button. (You can select more than one MAC
addresses).
If you want to delete all MAC addresses listed here, please click
'Delete All' button.
78