Hawking HWABN25 User Manual page 44

Channel Number (3):
Mac Address (4):
Set Security (5):
Adv. IP Address (6)
When you finish with all settings, please click 'Apply' (7); Plug in the devices that you
wish to bridge. Note, you must also set up the other bridges for this product to work
properly in a bridge-point to multi-point. Congratulations, you have set up the
HWABN25 in AP Bridge-Point to Multi-point!
802.11b and 802.11g band will be able to connect to this access
point.
If you want to allow 802.11b, 802.11g, and 802.11 Draft-N
clients to connect to this access point, select 2.4GHz (B+G+N).
Please select a channel number you wish to use. Please note
that this should be the same channel as the other bridge you
wish to connect to.
Please input the MAC addresses of the other bridges you wish to
make a connection with.
Click this button to select an encryption mode for this wireless
link, a new popup window will appear. Note: the security must
be the same on the other bridges.
This section allows you to set an IP Address and subnet mask to
fit your network if needed. Uncheck the box to input.
Otherwise, the default IP Address is 192.168.1.241.
43