Hawking HWABN25 User Manual page 71

Transmit Power(12):
After you finish these wireless settings, please click 'Apply' button, button, and the
following message will be displayed on your web browser:
Please click 'Go Back' to go back to previous setup menu; to continue on access point
setup, or click 'Apply' to reboot the access point so the settings will take effect. Please
wait 30-60 seconds for the access point to reboot.
collisions between 802.11b and 802.11g/n wireless access points.
It is recommended to set this option to 'Auto' or 'Always'.
However, if you set to 'None', your wireless access point should
be able to function properly.
You can set the output power of wireless radio. Unless you are
using this wireless access point in a large open space, you may
not have to set output power to 100%. This will enhance
security (malicious / unauthorized users in distance will not be
able to reach your wireless access point).
70