Hawking HWABN25 User Manual page 70

Beacon Interval(3):
DTIM Period(4):
Data Rate(5):
N Data Rate(6):
Channel Width(7):
Preamble Type(8):
Broadcast ESSID(9):
WMM(10):
CTS Protect(11):
Set the beacon interval of wireless radio. Do not modify the
default value if you do not understand the function, default
value is '100'.
Set the DTIM period of wireless radio. Do not modify the
default value if you do not understand the function, default
value is '3'.
Set the wireless data transfer rate to a certain value. Since most
of wireless devices will negotiate with each other and pick a
proper data transfer rate automatically. It is not necessary to
change this value unless you know what will happen after
modification.
Same as above, but only for 802.11n clients.
Set channel width of wireless radio. Do not modify the default
value if you do not understand the function, default setting is
'Auto 20/40 MHz'.
Set the type of preamble, do not modify the default value if you
do not know what it is, default setting is 'Short Preamble'.
Decide if the wireless access point will broadcast its own ESSID
or not. You can hide the ESSID of your wireless access point (set
the option to 'Disable'), so only those people who know the
ESSID of your wireless access point can connect to the unit.
Wi-Fi MultiMedia (WMM) will enhance the data transfer
performance of multimedia contents when they are being
transferred over a wireless network. If you do not understand
the function, then it is safe to set this option to 'Enable',
however, default value is 'Disable'.
Enabling this setting will reduce the chance of radio signal
69