Hawking HWABN25 User Manual page 65

3-4-1-5 AP Bridge-WDS
Wireless Distributing System. This allows you to create a wireless network using up to
four HWABN25's using the same SSID (wireless name). It will broadcast a WiFI signal.
NOTE: For WDS mode, the output signal nature is the same as that of
normal AP mode.
Band (2):
SSID (3):
Channel Number (4):
Associated Clients (5): Click 'Show Active Clients' button, then an "Active Wireless
4
Select the band you want to use, all the HWBN25's must use the
same setting. Refer to 3-3-1-1 for definitions.
Input the SSID of your HWABN25's, the setting should be the
same with other HWABN25's for the convenience of roaming.
Select the channel you want to use, all the HWABN25's must use
the same setting.
64
2
3
5
6
7