Hawking HWABN25 User Manual page 42

Channel Number (3):
Mac Address (4):
Set Security (5):
Adv. IP Address (6)
When you finish with all settings, please click 'Apply' (7); Plug in the devices that you
wish to bridge. Note, you must setup another Bridge –point to point device in order for
this to work properly in point to point. In that bridge, you will input the MAC address
of this unit. Congratulations, you have set up the HWABN25 in AP Bridge-Point to
Point!
clients to connect to this access point, select 2.4GHz (B+G+N).
Please select a channel number you wish to use. Please note
that this should be the same channel as the other bridge you
wish to connect to.
Please input the MAC address of the other bridge you wish to
make a connection with
Click this button to select an encryption mode for this wireless
link, a new popup window will appear. Note: the security must
be the same on the other bridge.
This section allows you to set an IP Address and subnet mask to
fit your network if needed. Uncheck the box to input.
Otherwise, the default IP Address is 192.168.1.241
41