Hawking HWABN25 User Manual page 62

3-3-1-2 Station-Infrastructure (Bridge)
The HWABN25 will allow you connect wired devices wirelessly to an existing wireless
router or access point. It will "bridge" these devices wirelessly with your network. It
will not broadcast any WiFi signal. It will only make a wireless connection between the
Access Point and the HWABN25.
Band (2):
SSID (3):
Site Survey (4):
Select the band you want to use. Refer to 3-3-1-1 for
definitions.
This is the name of wireless network. You can type the SSID of
the network you would like to connect here.
When you use this wireless router as a wireless station for
Ethernet network device to have wireless capability, you have to
associate it with a working access point. Click 'Select Site
Survey' button, then a "Wireless Site Survey Table" will pop up.
It will list all available access points near by. You can select one
access point in the table and it will join wireless LAN through
this access point.
61
2
3
4