3-4-1-4 AP Bridge-Point to Multi-Point
Similar to AP Bridge – Point to Point, this allows you to connect several HWABN25's to
one point. No WiFi signal will be broadcast and it will only make a wireless connection
between the HWABN25s.
Band (2):
Channel Number (3):
MAC address
1 to 4:
Security Settings (8):
3
Select the band you want to use, all HWABN25's must use the
same setting. Refer to 3-4-1-1 for definitions.
Select the channel you want to use, all HWABN25's must use the
same setting
Input the MAC address of other HWABN25s.
Click to set security settings for this connection
(Please go to section '3-4-3 Wireless Security'
for detailed instructions).
63
2
4
5