Hawking HWABN25 User Manual page 63

3-4-1-3 AP Bridge-Point to Point
Similar to station-infrastructure, this requires two HWABN25's on each end. This will
create a wireless bridge between these two points. No WiFi signal will be broadcast and
it will only make a wireless connection between those two points.
NOTE: Two HWABN25's must use the same mode, band, channel
number, and security setting!
Band (2):
Channel Number (3):
MAC Address (4):
Security Settings (5):
3
Select the band you want to use, the two HWABN25's must use
the same setting. Refer to 3-3-1-1 for definitions.
Select the channel you want to use, the two wireless
HWABN25s must use the same setting.
Input the MAC address of another HWABN25
Click to setting security for this connection
(Please go to section '3-3-3 Wireless Security'
for detailed instructions).
62
2
4
5