2-4-4 Setup procedure for 'AP Bridge-Point to Multi-Point'
6
Wireless (1):
Band (2):
1
3
Shows you if the wireless is enabled/disabled
Please select the wireless band you wish to use. By selecting
different band setting, you'll be able to allow or deny the
wireless client of a certain band.
If you select 2.4GHz (B), 2.4GHz (N), or 2.4GHz (G), only
wireless clients using the wireless band you select (802.11b,
802.11 Draft-N, or 802.11g) will be able to connect to this
access point.
If you select 2.4GHz (B+G), then only wireless clients using
42
2
4
5
7