Removing The Expansion Card From The Slot; Inserting The Expansion Card In The Slot - Fujitsu PRIMERGY RX900 S2 Upgrade And Maintenance Manual

Hide thumbs Also See for PRIMERGY RX900 S2:

Table of Contents

Removing the expansion card from the slot

Figure 91: Removing the expansion card from the slot

Ê If applicable, remove the cables from the expansion card.Remove the slot

lock by pulling the green handle upward (1), pushing the plastic part down

(2), and lifting the slot lock (3).

Ê Carefully pull the expansion card out of the lot (4).

Figure 92: Inserting the expansion card in the slot

Upgrade and Maintenance Manual

Expansion cards and BBU