Inserting The Fan Cage; Completing The Task - Fujitsu PRIMERGY RX900 S2 Upgrade And Maintenance Manual

Cables

15.1.8 Inserting the fan cage

Figure 195: Inserting the fan cage
Ê Insert the fan cage in the bay (1).
Ê Fasten the captive screws (2).

15.1.9 Completing the task

Ê Perform the following procedures to complete the task:
1. Install the PCI Riser, see
2. Install all expansion cards and dummy modules in PCIe slots #8 to #17,
see "Expansion cards and BBU" on page 105
I
Make sure that you reinstall each card in the slots it was located
before the replacement.
3. Install all CPUMEMRs, see
I
Make sure that you reinstall each CPUMEMR in the slot it was
located before the replacement.
302
"Expansion cards and BBU" on page 105
"Removing the CPUMEMR" on page 190
Upgrade and Maintenance Manual
RX900 S2