Required Tools; Starting The Task - Fujitsu PRIMERGY RX900 S2 Upgrade And Maintenance Manual

10.2.1 Required tools

Starting and completing the task:
– key for the rack doors (if applicable)
– Phillips Ph2 screw driver
Replacing the processor:
– Phillips Ph2 screw driver

10.2.2 Starting the task

Ê Perform the following procedures:
1. "Opening the rack door" on page 40
2. "Locate the faulty server" on page 37
3. "Shutting down the server" on page 41
4. "Sliding the server out of the rack" on page 42
5. "Opening the server" on page 44
6. "Removing the CPUMEMR" on page 190
RX900 S2
Upgrade and Maintenance Manual
Processors
207