Fujitsu PRIMERGY RX900 S2 Upgrade And Maintenance Manual page 293

15 Cables
Authorized personnel
Authorized specialist personnel can carry out replacement tasks for
integral server components. Ask you local Fujitsu service center for
more detailed information.
V
CAUTION!
Procedures indicated as "Authorized personnel only" must be
done by Fujitsu service personnel or technicians trained by
Fujitsu for doing these tasks. Please note that unauthorized
interference with the system will void the warranty and exempt
the manufacturer from all liability.
V
CAUTION!
Follow the safety instructions in the chapter
page 31.
This section comprises procedures on replacing the following cables:
"Replacing the control panel cable" on page 303
"Replacing the chassis ID board cable" on page 309
"Replacing power cables of the optical drive, the SAS backplane, or the
power distribution board" on page 317
"Replacing the SAS cable, the SATA cable, the front video connector cable,
or the front USB cable" on page 335
For the cable plan see
RX900 S2
"Cabling" on page
Upgrade and Maintenance Manual
"Safety instructions" on
370.
293