Inserting The Dummy Module In The Slot; Completing The Task - Fujitsu PRIMERGY RX900 S2 Upgrade And Maintenance Manual

Expansion cards and BBU
8.5.8

Inserting the dummy module in the slot

Figure 74: Inserting the dummy module in the slot
Ê Carefully insert the removal tool together with the dummy module in the
slot (1).
Ê Insert the slot lock (2) and relock the slot (3).
Ê Close the hot-plug slot (4).
8.5.9

Completing the task

Ê Perform the following procedures to complete the task:
1. "Installing the rear cover" on page 48
2. "Mounting the server in the rack" on page 49
3. "Closing the rack door" on page 51
138 Upgrade and Maintenance Manual
RX900 S2