Starting The Task; Connecting The Bbu Cable To The Bbu - Fujitsu PRIMERGY RX900 S2 Upgrade And Maintenance Manual

Expansion cards and BBU

8.11.2 Starting the task

Ê Perform the following procedures:
1. "Opening the rack door" on page 40
2. "Shutting down the server" on page 41
3. "Sliding the server out of the rack" on page 42
4. "Removing the rear cover" on page 46

8.11.3 Connecting the BBU cable to the BBU

Figure 99: Connecting the BBU cable
Ê Connect the BBU cable to the battery.
I
The cable can only be installed in one direction. Make sure that the
markings on the connector are aligned with the corresponding marking
on the socket.
170 Upgrade and Maintenance Manual
RX900 S2