Starting The Task; Selecting The Dimm Memory Module Slot - Fujitsu PRIMERGY RX900 S2 Upgrade And Maintenance Manual

Main memory
9.3.2

Starting the task

Ê Perform the following procedures:
1. "Opening the rack door" on page 40
2. "Shutting down the server" on page 41
3. "Sliding the server out of the rack" on page 42
4. "Opening the server" on page 44
5. "Removing the CPUMEMR" on page 190
9.3.3

Selecting the DIMM memory module slot

Ê Choose the DIMM memory module slot according to the configuration rules
summarized in this section. For detailed information see "Baseboard D3144,
CPUMEMR D3145, PCIR D3146 for PRIMERGY RX900 S2 Technical
Manual".
CPUMEMRs are populated in four steps. In each step, four DIMM memory
modules are added. At least four DIMM memory modules must be installed on
CPUMEMR #1 and #2. CPUMEMRs #3 to #8 can be left empty.
table 5 show the population order for DIMM memory modules.
192 Upgrade and Maintenance Manual
figure 113 and
RX900 S2