Table of Contents
Advertisement
C
able Assignments Headset, Jack plug and 5pin XLR
Please Note: If you only want to extend the reach of the ITC-100SL Belt Pack cabling then Datavideo already sell
pre-manufactured XLR cabling for doing this in 20m (CB-3) and 50m (CB-4) lengths. Please ask your local dealer
for price and availability of additional CB-3 and CB-4 cables.
CB-3 XLR cable / 5pin XLR Connector on ITC-100SL
Pin
1
2
3
4
5
5pin XLR Cable is a straight through cable pin 1 to pin 1, pin 2 to pin 2 etc
ITC-100SL Belt pack 3.5mm Jack socket Headset connector
Please Note: For connecting a professional headset Datavideo can supply a mini jack to XLR adaptor cable which
would support headsets with a Dynamic microphone. Please contact your dealer or local Datavideo office for more
information on this XLR to Jack plug adaptor cable.
In the case of a professional headset with an Electret microphone a small SDM of 1yf/1uf (for decoupling ac hum)
will be required on the Jack Tip/XLR pin 2 cabling.
Jack
Tip
Ring
Ground/Sleeve
Cable
Red
Black
Shield
Green
White
Headset XLR
Pin 2
Pin 4
Pins 1 & 3
Assignment
Tally Red
Tip (Talk & Call)
Common with Ground of XLR
12v DC power to ITC100SL
Tally Yellow
Assignment
Microphone (can be Dynamic or Electret)
Earphone (Impedance range 8-100
(ideally 30-40
Common Ground
43
Ω)
Ω
)
Advertisement
Table of Contents
