Cable Reel - Datavideo TLM-170V Instruction Manual

7. Cable Reel

1. Place an empty cable reel on a flat surface.
2. Straighten out the cable which is approximately 3 meters long as shown in the diagram below:
3. Grab one end of the cable and push it through the center hole.
4. Coil one end of the 3-meter cable around the external cable drum in clockwise direction
Approx. 3m long
內側
Internal
After the cable has been properly coiled, firmly
attach the connector to one side of the cable reel.
with a velcro.
15
Pull the lever to the brake position in
order to immobilize the cable reel.
Make sure the protective rubber ring of
the cable reel does not come off.