Preparing The Pip Output In The Pst_Sub Window; No Pip Windows; Sending The Prepared Pip To The Program Output - Datavideo HS-600 Instruction Manual

Preparing the PIP output in the PST_SUB Window

When preparing the PIP display output you will want to see it in the Multi-Image Preview PST_SUB output. To
achieve this you need to press the PIP button on the lower Sub Source row of buttons first.

No PIP Windows?

If you can only see your chosen background image but no smaller PIP windows in the PST_SUB image then you
need to activate one or both PIP windows.
To display PIP_1 on top of your chosen background video press the PIP 1 ENABLE button to toggle it ON or OFF.
To display PIP_2 on top of your chosen background video press the PIP 2 ENABLE button to toggle it ON or OFF.
You now need to decide if you are happy with the position and size of PIP_1 or PIP_2 windows. You may also
decide to only use one smaller PIP window instead of two.

Sending the prepared PIP to the Program output

In our example we have prepared the Picture In Picture images in the Multi-Image Preview PST_SUB window so
that we know what it looks like and we know that we are now happy with the layout. We now want to use this in our
production on the Program PGM_MAIN output. To do this we can use a simple dissolve or wipe transition with the
T-Bar or Take button. Alternatively we could do a straight switch with the CUT button.
22